Spy vs Spy Decal / Version 2 | 8.0in for Car Truck Helmet Window Laptop Welding Moto MX

$32.00

Categories: , ,

Description

One set of two (2) decals
See my other listing for a version *without* a white outline around the black spy for on a white background.
Black Spy is 8.0 x 5.25in
White Spy is 8.0 x 7.25in
✅Our decals look deadly and stay alive!
✅Printed in high resolution for unbeatable color and razor sharp graphics on premium vinyl. They will stick to any clean, relatively flat surface! Just peel and stick!
✅Made from premium 6+ year outdoor vinyl with air release adhesive allowing easy application and no air bubbles. (lifetime indoor) 
✅Laminated with a high gloss overlaminate for abrasion resistance and protection.
✅Decorate your car, truck, motorcycle, toolbox, window, laptop, ipad, tablet, locker, wall, bumper, guitar case, refrigerator, bicycle… any relatively flat, clean surface.

 

Description
This decal / sticker is a printed and die-cut vinyl decal on white vinyl. All decals are made from premium brand name, high-quality vinyl that is laminated and will last for many years. Indoor durability is for forever; outdoor is 6+ years. It is very easy to apply on any plain surface; and can be just as easily removed. It has three layers: Paper backing, vinyl decal, and transfer tape. 

 

Application Directions
Rub the whole decal down to be ensure the transfer tape is properly adhered to the sticker.

  1. Clean the surface where the decal will be installed with minimum 50/50 isopropyl alcohol / water mix. If it’s really gross or oily, clean it one more time. Do not apply on extreme cold or hot surfaces. Ideal surface temperature is 15°C – 32°C (60°F & 90°F)
  2. Slowly removed the paper backing making sure that your decal remains stuck to the transfer tape. If part of your decal lifts up with the backing, rub the paper backing back down against it until it stays stuck to the transfer tape.
  3. Once it’s peeled away from the backing, line up & position your decal against the surface to which it will be applied. Google “hinge method” on YouTube to get a good grasp. Using a credit card as squeegee, to smooth down your decal, making sure that it is completely stuck to the surface.
  4. Slowly & carefully remove the transfer tape from your decal at a 45° angle, making sure that your decal is stuck to the surface. If you see part of the decal does not release from the transfer tape, press and it back down to the surface and repeat the process.
  5. Check for air bubbles. In most cases air bubbles can be worked to the edge of the decal, but if not, take a needle and poke a hole into the bubble to allow the air out and rub down again.
  6. (Optional) Lock it in with a little heat from hair dryer or heat gun, taking care not to get too close and melt the decal.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

inspyre design + print