Habanos Etch / Frosted Decal / Sticker for Cigar Humidor Wineador | ANY SIZE

$17.00$65.00

Description

Don’t see the size you need – just ask and you shall receive!
Need a regular cut version for the vehicle? Send a note with or after ordering!

This decal is precision cut from premium vinyl to replicate a frosted / etched glass look. Ready to apply to the BACK of your glass paned cabinet humidor, wineador, walk-in humidor or whatever you may have!


✅ PREMIUM QUALITY /// 
Our decals look KILLER and stay ALIVE. Long lasting 6+ year life expectancy outdoor, lifetime indoor durability. Decorate your car, truck, boat, motorcycle, window, laptop, phone, wall, guitar, case, refrigerator, helmet, hard hat, or your custom project.

✅ DESIGNED AND MADE BY A PRO /// Everything is designed by hand without tracing software giving you professional looking graphics without any funky lines or ugly text.

🚛 SHIPPING /// 14.0in and under ships via Lettermail. Over 15.0in ships via UPS

 

=================================================================================================
✅ Application Directions 
First, with an old credit card or squeegee, rub the back of whole decal down to be ensure the transfer tape is properly adhered to the sticker.
  1. Then clean the surface where the decal will be installed with minimum 50/50 isopropyl alcohol / water mix. If it’s really gross or oily, clean it one more time. Do not apply on extreme cold or hot surfaces. Ideal surface temperature is 15°C – 32°C (60°F & 90°F)
  2. Slowly removed the paper backing making sure that your decal remains stuck to the transfer tape. If part of your decal lifts up with the backing, rub the paper backing back down against it until it stays stuck to the transfer tape.
  3. Once it’s peeled away from the backing, line up & position your decal against the surface to which it will be applied. Google “hinge method” on YouTube to get a good grasp. Using a credit card as squeegee, to smooth down your decal, making sure that it is completely stuck to the surface.
  4. Slowly & carefully remove the transfer tape from your decal at a 45° angle, making sure that your decal is stuck to the surface. If you see part of the decal does not release from the transfer tape, press and it back down to the surface and repeat the process.
  5. Check for air bubbles. In most cases air bubbles can be worked to the edge of the decal, but if not, take a needle and poke a hole into the bubble to allow the air out and rub down again.

Perfect for the connoisseur of Warped Rocky Patel Nub Padron Davidoff Drew Estate Arturo Fuente Epic Camacho La Flor Dominicana My Father Ashton AJ Fernandez Olicva Alec Bradley Perdomo Joya de Nicaragua EP Carillo Plasencia Tatuaje Fratello 1502 La Aroma de Cuba Aganorsa Leaf Villiger Diesel Nat Sherman Crowned Heads Quesada Ghurka Cohiba Montecristo Romeo y Julieta Partagas Hoyo de Monterrey H. Upmann José L. Piedra Cuaba San Cristóbal de La Habana Trinidad Bolivar Fonseca Punch Quintero Vegas Robaina Diplomaticos El Rey del Mundo Juan López La Flor de Cano La Gloria Cubana Por Larrañaga Quai d’Orsay Rafael González Ramón Allones Saint Luis Rey Sancho Panza  Vegueros (Cohiba Montecristo Romeo y Julieta Partagás Hoyo de Monterrey H. Upmann José L. Piedra Cuaba San Cristóbal de La Habana Trinidad Bolivar Fonseca Punch Quintero Vegas Robaina Diplomáticos El Rey del Mundo Juan López La Flor de Cano La Gloria Cubana Por Larrañaga Quai d’Orsay Rafael González Ramón Allones Saint Luis Rey Sancho Panza  Vegueros

Additional information

Width

6.0in, 8.0in, 10.0in, 11.0in, 12.0in, 14.0in, 16.0in, 18.0in, 20.0in, 22.0in, 24.0in

inspyre design + print